Digi-Star Auto-Log Sensor Kit - Use with GT560

Hands off (AutoLog) Operation
The GT560 indicator has many features but it also boasts simple hands-off operation using a RPM
sensor on the PTO shaft to trigger the start of the unloading process and the end of the unloading
process. AutoLog aids in preventing operator mistakes and loss of load data due to the operator
forgetting to push the “start/stop” key. Manual control using the “start/stop” key is possible should the
sensor be damaged or not functioning by disabling AutoLog. See page 32 for instructions. Weight, date,
time and additional information are stored automatically after each load is completed.

AutoLog2
AutoLog2 is an optional function which allows the operator to set weight targets when unloading. The
indicator will sound an alarm and/or activate a control signal when the preset unload weight is met.
There are 3 methods available to control the targeted unloaded weight:
 Weight set per Truck ID – Each truck with a stored ID can have a preset weight. This feature is
useful when working with trucks of various capacities.
 Stored Target Weight- When the same amount is unloaded each time. The stored weight repeats
until changed. Useful when all trucks have the same capacity.
 Load by Load- With each unloading event the GT560 will prompt the operator to enter the required
weight to unload. Useful when flexibility is required.

Note: This is the Auto-Log sensor kit for the GT460/ GT560 Indicator.  It is required for feature to work.