Hey there, Canadian friend! 🇨🇦

Did you know we have a local distributor just for you? Contact Kearny Planters at (519) 678-3206 or visit their contact page.

Feel free to keep browsing here; just note down our part numbers to place your order with them!

Previous image
DICKEY-john RVSIII Radar Gun
Next image
Zoom image view larger image

DICKEY-john RVSIII Radar Gun

Item #: 1000-7198

Not rated yet
  • Brand
    DICKEY-john

World-class accuracy in a ground speed sensor

  • $845

Quantity:  
Add a different product to compare
  • Shipping Weight
    10 lbs
  • P/N
    1000-7198

World-class accuracy in a ground speed sensor

The high-performance Radar III is a streamlined, more compact version of our best-selling Radar II model.

  • Weighs only 1 lb.
  • 4 x 3.4 x 3.1 inches
  • High-tech planar array for the truest velocity measurement possible
  • Views ground surface for accurate ground speed detection
  • Velocity errors of less than or equal to 1-3% after in-field calibration
  • Easy to install
  • Can be mounted to view forward or backward from vehicle
  • Brand
    DICKEY-john
Customer reviews
Please sign in to add review
There are no comments yet. Be the first to leave a comment

Q: What is the difference between the Radar II and the Radar III?

A: The main difference is size of the sensor. The Radar II is 4 x 4 x 12.5 in and weights 4.5 lbs. The Radar III is 4 x 3.4 x 3.1 in. and weights only 1 lb. 

Q: Where would I use these Sensors?

A: You can use these sensors to tell you the speed you are moving from .33- 67 mph. It can be pointed forwards or backwards towards the ground. Anywhere from 18-48 inches above the ground. 

Q: What is the mounting angle of the radar?

A: Both radars should be mounted at 35±5˚ from target surface.

Q: What kind of signal does the Radar put out?

A: The radar uses a 0-12 volt squarewave signal. 

Q: How do you calibrate the radars to my controller?

A: The radars are calibrated thru the console or material application controller you are using. Most consoles have a ground speed calibration screen to calibrate them by driving a specific distance. 

Q: What is the pin–out of the Radars?

A: 1.Black – Ground 2.Green – Signal 3.Red – Power 4.White- Status 

Q: How can I Check to see if my radar is working?

A: You can test the radar by putting your console in the ground speed calibration mode, and then disconnect the round four pin connector. Take a jumper wire (on the console side of the connector) and put one end on pin 1 and with the other end tap pin 2 on and off

Q: Can I use my RVSII without the plastic lens on the front?

A: You need the window to seal the unit from the elements. You will get moisture in the horn and the transceiver which will ruin the radar.

Q: How tight should I tighten the mounting bolts on my RVSIII?

A: Tighten the RVSIII down with a nut driver instead of a ratchet and socket.

Q: When I am sitting still my console is showing speed?

A: You are getting vibration from the frame. You need to move the radar to another place on the frame or you may have a Transceiver going bad.

Customers who bought this product also bought
Drop items here to shop
Product has been added to your cart
    • $21.87

    Item #: 1000-0260

    Not rated yet
    Add a different product to compare
    • $115

    Item #: 1000-6515

    Not rated yet
    Add a different product to compare
-->